Eco-Friendly Aerogel Fireproof Insulation Coating Advantage
Environmentally Responsible Material Solution
The coating is designed to support low-emission and energy-saving applications, helping businesses align with modern environmental and sustainability requirements.
Fireproof and Heat-Resistant Protection
It forms a protective thermal barrier that helps slow heat spread and improve surface fire resistance in demanding operating conditions.
Reduced Material and Structural Load
Compared with bulky traditional insulation systems, the coating provides insulation and fire protection with less material thickness and lower added weight.
Long-Term Surface Stability
The coating maintains stable performance under temperature fluctuations, helping reduce cracking, peeling, and maintenance frequency over time.
Thermal Insulation Aerogel coating Application
Green Building and Sustainable Construction
Applied to walls, ceilings, steel structures, and building surfaces in energy-efficient construction projects.
Industrial Manufacturing Facilities
Used on equipment, piping systems, storage tanks, and processing areas requiring both thermal protection and fire safety.
Data Centers and Electrical Rooms
Helps improve thermal management and fire protection for sensitive electrical and control environments.
Transportation and Infrastructure Projects
Suitable for rail transit systems, tunnels, terminals, and public infrastructure with strict safety and environmental requirements.
Renewable Energy Systems
Can be used in battery energy storage systems, solar equipment structures, and clean energy facilities.
custom Aerogel Insulation coating manufacturer
Commitment to Sustainable Product Development
We focus on insulation coating solutions that combine thermal performance with environmentally conscious material design.
Reliable Supply for International Projects
Our production and export capabilities support stable delivery schedules for distributors, contractors, and engineering projects worldwide.
Practical Performance for Real Applications
Our coatings are developed for practical installation, long-term durability, and compatibility with different industrial and building environments.
Customized Support for Different Markets
We provide flexible product specifications, OEM support, and application recommendations based on regional project requirements.
Aerogel Coating Application Guide
Precautions
To prevent water penetration into wooden substrates, the base surface must be treated with a wood sealing coating.
For concrete substrates with unevenness, dusting, or peeling caused by partial repairs, use a cement surface hardener for treatment.
For highly absorbent substrates such as aerated concrete, treat with a multi-purpose sealing coating.
To prevent cracking and uneven water absorption at the joints of gypsum board, asbestos board, etc., pre-treat the substrate.
For metal substrates such as thin steel plates and iron plates, use Lima Ke A (or "Rimak A") for anti-rust treatment.
Additional Notes
The substrate must be dry, flat, solid, clean, and free of dust or loose powder.
Prepare sufficient coating material (approx. 1–2 liters per square meter). Sufficient quantity results in a thicker, more effective film. Apply multiple thin coats.
Application is not recommended during condensation. The coating is water-based and water-soluble before curing, so it will not dry properly.
During Construction
When roller-applying, each coat must be no thicker than 1 mm. Apply the next coat only after the previous one has fully cured and dried. Repeat until the total thickness reaches 1–2 mm.
The coating must be thoroughly mixed. For large buckets, use an electric mixer for 3–5 minutes, mixing all the way to the bottom. Do not add water. The special basement anti-condensation coating is thick yet fluid when properly mixed.
If color adjustment is needed, add a small amount of water-based colorant. This will not affect the anti-condensation performance.
After Construction
After application, ensure natural ventilation. In high-humidity conditions, use a dehumidifier to speed up curing for better results.
Store at room temperature, away from light. Do not freeze or expose to direct sunlight. After use, tightly seal the container to prevent the material from drying out and curing inside.
The special basement anti-condensation coating has a surface drying time of 4 hours and a full curing time of 24 hours. Allow adequate drying time.
FAQ
1. What makes this aerogel coating eco-friendly?
The coating is designed to support energy-saving performance and reduced material consumption while meeting modern environmental expectations for insulation products.
2. Does the coating provide both insulation and fire protection?
Yes. It combines thermal insulation performance with fire-resistant protection in a single coating system.
3. Is the coating suitable for indoor applications?
Yes. It can be used for both indoor and outdoor environments depending on project requirements.
4. Can it help improve building energy efficiency?
Yes. By reducing heat transfer through surfaces, the coating can help lower heating and cooling energy demand.
5. What types of substrates are compatible?
The coating can generally be applied to steel, concrete, cement board, metal panels, and other common construction or industrial surfaces.
Hot Tags: eco-friendly aerogel fireproof insulation coating, China eco-friendly aerogel fireproof insulation coating manufacturers, suppliers, factory
