
1. Light weight and environmental protection: inherits the lightweight characteristics of aerogel, which can reduce the load of coated objects such as building external walls, such as 2mm aerogel insulation coating system compared with 35mm thickness insulation mortar weight reduced by 90%. And mostly water as a solvent, does not contain volatile harmful compounds, production and use process safety and environmental protection.
2. Excellent fire performance: aerogel itself is a flame retardant substance, so that the paint has flame retardant characteristics. Its small pore size can effectively prevent the direct contact between the protected substrate and the air, and the very low thermal conductivity can reduce the flame temperature, so that the substrate can not reach the ignition point.
3. Collaborative fire resistance with the substrate: it can be well combined with a variety of substrates to form an overall fire insulation system. In a fire, it and the substrate cooperate with each other to jointly resist the invasion of flame and heat, and enhance the fire performance of the overall structure, rather than acting alone.
application
1. Construction field: It can be used in the interior and exterior walls of buildings and roofs, which can effectively heat insulation, reduce indoor temperature fluctuations, reduce the energy consumption of refrigeration and heating equipment such as air conditioning, and improve the comfort of living and working environment; It also has the function of moisture-proof, waterproof and mildew proof, protecting the wall and extending the service life of the building; At the same time, good fire performance can improve the fire safety level of the building and reduce the fire risk.
2. Industrial field: suitable for high temperature steam pipeline, industrial furnace, oil cracking equipment, etc., can withstand high temperature, reduce heat loss, improve energy efficiency, reduce energy consumption; In chemical, petroleum and other industries in the storage tank, reactor application, can play a heat insulation, fire, anti-corrosion effect, to prevent the medium due to temperature changes and affect the performance or produce safety hazards; It can also be used for sound insulation and noise reduction of industrial equipment to improve the working environment.
3. Aerospace field: It can provide efficient heat insulation protection for spacecraft, satellites, aircraft, etc., to ensure the normal operation of internal electronic equipment and instruments in extreme temperature environments; Its light weight helps to reduce the weight of the aircraft, improve fuel efficiency, and increase range and payload.
FAQ
1. Can it be mixed with ordinary paint?
Generally, it is not recommended to mix at will, because the composition and performance of aerogel coatings are greatly different from that of ordinary coatings, which may change the performance of aerogel after mixing, affecting its thermal insulation, fire prevention and other effects, and may also lead to coating delamination, precipitation, poor drying and other problems.
2. What treatment should be done to the base before construction?
It is necessary to strictly treat the base wall to ensure that it is solid, smooth and dry, clean up impurities such as oil and dust, as well as coatings that are not firmly attached and foreign bodies that affect adhesion, and the wall humidity should be controlled below 10%.
3. What is the role in the communication base station?
In the communication base station, it can be used for the thermal insulation of equipment and base station buildings, which can effectively reduce the temperature in the base station, reduce the equipment failure caused by overheating, improve the stability of equipment operation, and also play a certain role in energy saving and reduce the energy consumption of the base station.
Hot Tags: aerogel paint, China aerogel paint manufacturers, suppliers, factory, Aerogel Thermal Insulation Coating, Aerogel Car Coating, Aerogel Powder Coating, aerogel coating, Aerogel Coating Price, Aerogel Coatings
| Project Name | Aerogel Spray Coating |
| Maximum Service Temperature | 180℃ |
| Wet Density of Coating | 800 kg/m³ |
| Dry Density | 260 kg/m³ |
| Volume Shrinkage Rate | ≤5% |
| Thermal Conductivity (at 25℃) | 0.035 W/(m·K) |
| Fire Rating | Class A2 |
| Material Consumption per m² for 10mm Thickness | 9 kg |
| Single Barrel Packaging Weight | 16 kg |
| Unit | kg/m³, kg/m³, %, W/(m·K), kg, kg |




