Aerogel insulation coating uses innovative nanotechnology to combine aerogel materials with high-performance coatings, creating a thin yet highly effective thermal barrier. This coating effectively prevents heat transfer, reducing energy waste and improving the indoor climate in various types of buildings, including walls, roofs, and facades. Its outstanding thermal insulation properties significantly reduce the temperature difference between indoor and outdoor environments, improving interior comfort.
● Technology Principle: Aerogel, a solid gas, has an extremely low thermal conductivity, allowing the coating to provide excellent thermal insulation even at a very thin layer.
● Suitable Environments: Perfect for buildings in extreme climates, such as very cold or hot regions, or where temperature fluctuations need to be managed carefully.
● Exceptional Thermal Insulation: The aerogel material has an extremely low thermal conductivity, providing efficient insulation even with a minimal coating thickness.
● Lightweight: Aerogel is incredibly low in density, which places minimal stress on building structures, making it suitable for high-rise buildings and designs with strict weight requirements.
● Waterproof & Durable: The coating not only offers excellent waterproof properties but also maintains stable performance in harsh environmental conditions, resisting aging and wear.
● Eco-Friendly & Non-Toxic: Made from non-toxic, environmentally friendly materials, this product contributes to achieving green building certifications such as LEED.
● Heat Resistance: The coating can withstand high temperatures, making it ideal for buildings exposed to extreme heat or thermal stress.
● Easy to Apply: The application process is simple and quick, allowing for reduced installation time and cost.
Application Guide
1.Surface Preparation:
● Ensure the building surface is clean and free of oils, dust, or debris before applying the coating.
● For old coatings, it's recommended to sand or clean the surface to ensure strong adhesion of the new layer.
2.Application Method:
● The coating can be applied using brushes, rollers, or spray equipment.
● For complex building surfaces, spraying is recommended to ensure even coverage.
● Typically, 2-3 layers are applied depending on the required insulation effect, and drying time should be at least 24 hours between layers.
3.Coating Thickness:
● The typical coating thickness ranges from 1-3mm depending on the thermal insulation requirements of the building.
● Increasing the thickness can further improve insulation, but generally, it should not exceed 5mm.
4.Application Conditions:
● Ideal application temperature: 10°C to 30°C.
● Avoid applying the coating in high humidity conditions to ensure proper adhesion and drying.
5.Maintenance & Care:
● Regularly inspect the coating, especially in environments with high humidity, temperature extremes, or exposure to wind and sand.
● If damage occurs, use the same material to repair the affected areas.
FAQ
1.What is the lifespan of the aerogel coating?
The coating is highly durable and can last over 10 years, maintaining its performance under normal conditions without significant aging or degradation.
2.Which types of buildings are suitable for this coating?
The coating is suitable for residential, commercial, and industrial buildings, particularly those requiring enhanced thermal insulation and energy savings.
3.How long will the insulation effect last?
The insulation effect remains stable over time, especially when applied correctly and maintained in suitable environmental conditions.
4.Does the coating require special maintenance?
Generally, no special maintenance is required, but periodic inspections are recommended, especially in harsh weather conditions, to ensure the coating remains intact.
5.Will the aerogel coating affect the appearance of the building?
The product is available in clear or customizable colors, ensuring it does not interfere with the aesthetic of the building while providing excellent insulation.
Hot Tags: aerogel insulation coating applied for building, China aerogel insulation coating applied for building manufacturers, suppliers, factory, Aerogel Car Coating, aerogel coating, Aerogel Coating Price, Aerogel Coatings, Aerogel Powder Coating, Aerogel Thermal Insulation Coating
| Project Name | |
| Maximum Service Temperature | 180℃ |
| Wet Density of Coating | 800 kg/m³ |
| Dry Density | 260 kg/m³ |
| Volume Shrinkage Rate | ≤5% |
| Thermal Conductivity (at 25℃) | 0.035 W/(m·K) |
| Fire Rating | Class A2 |
| Material Consumption per m² for 10mm Thickness | 9 kg |
| Single Barrel Packaging Weight | 16 kg |
| Unit | kg/m³, kg/m³, %, W/(m·K), kg, kg |
