1. Excellent Thermal Insulation Performance
Aerogel is one of the best thermal insulation materials known to date, possessing extremely low thermal conductivity. The combination of aluminum foil's reflectivity and aerogel's insulation properties effectively isolates heat and prevents heat transfer.
2. Lightweight and High Strength
Due to the lightweight nature of aerogel itself, double-sided aluminum foil aerogel blankets are typically very lightweight, making them easy to install and transport. While ensuring excellent insulation, it reduces overall weight, making it suitable for applications where weight reduction is crucial.
3. Waterproof and Moisture-Proof
The aluminum foil layer has good waterproofing properties, effectively preventing moisture penetration and avoiding performance degradation caused by moisture absorption in the aerogel. Therefore, it maintains high insulation efficiency even in humid environments.
4. High Temperature Resistance
The combination of aerogel and aluminum foil materials typically exhibits high temperature resistance, capable of withstanding extremely high temperatures, usually in the range of 250°C to 1000°C, with some special materials capable of withstanding even higher temperatures.
5. Compressive Strength and Durability
This aerogel blanket not only provides excellent thermal insulation but also maintains structural stability under certain pressure. Due to the extremely high specific surface area and structural strength of aerogel, it can be used for a long time without easily being damaged.
| Item | Details |
| Product Name | Double-Sided Foil Aerogel Blanket |
| Product Brand | Runfew |
| Product Thickness | 3/6/10mm |
| Product Width | 1.5m |
| Thermal Conductivity (at 25℃) | >0.018W/m.k |
| Density | 180kg/m2~200kg/m3 |
| Applicable Temperature | -200℃~650℃ |
| Hydrophobicity | Fully Hydrophobic |
application
Aerospace：Used in spacecraft thermal protection systems and engine insulation to protect equipment from extreme temperatures.
Automotive：Provides heat protection in engines, exhaust systems, and battery packs, improving performance and safety.
Building：Used in external walls, roofs, and interior insulation to enhance energy efficiency and comfort.
Industrial：Applied in high-temperature industrial equipment and pipelines to reduce heat loss and ensure safe operation.
Oil and Gas：Used for insulation in offshore platforms and pipeline systems to prevent energy waste and equipment damage.
Installation Precautions
1.Ensure Surface Cleanliness：Clean the installation surface to remove dust, grease, moisture, or other contaminants, as they can affect the adhesion and insulation performance of the aerogel blanket.
2.Avoid Over-Compression：Do not compress the blanket too much during installation, as this can reduce its thickness and insulation performance. Maintain the blanket's original structure for optimal heat resistance.
3.Be Careful When Cutting or Customizing：Use appropriate tools when cutting the aerogel blanket, and wear protective gear to avoid damaging the material or injuring yourself during the process.
4.Ensure Aluminum Foil Integrity：Protect the aluminum foil layer from damage during installation. If any tears or holes occur, repair them promptly to maintain the insulation effectiveness.
5.Avoid Exposure to High Humidity：Do not expose the blanket to high humidity or extreme environmental conditions for extended periods, as this could affect its insulation properties.
6.Correct Installation Direction：Ensure the aluminum foil layer is installed correctly with its reflective side facing the appropriate direction to maximize thermal reflection.
7.Wear Personal Protective Equipment：Always wear gloves and goggles when handling or cutting the material to protect yourself from gel particles or sharp aluminum foil edges.
8.Proper Fixing and Edge Sealing：Use high-temperature adhesives or tapes to secure the blanket in place and seal the edges to ensure it stays intact and does not get damaged.
9.Check Seam Sealing：Ensure that seams are properly sealed to prevent air or heat leakage, maintaining optimal thermal insulation.
10.Adaptability to Environment：Ensure the installation environment is suitable for the aerogel blanket's intended use, particularly with respect to temperature, to ensure long-term performance.
Hot Tags: double-sided foil aerogel blanket, China double-sided foil aerogel blanket manufacturers, suppliers, factory, 5mm Fiberglass Aerogel Blanket, 2mm Fiberglass Aerogel Blanket, 3mm Fiberglass Aerogel Blanket, 6mm Fiberglass Aerogel Blanket, fiberglass aerogel blanket, 10mm Fiberglass Aerogel Blanket
